Home » AutoModified Shop, AutoModified Website, Modified Cars

MSD Ignition systems available from AM

9 May 2012 No Comment

The MSD Ignitions systems can now be acquired from Automodified. MSD Ignition products are the finest ignition components you can install on your car whether it’s a daily driver, Streetcar, purpose built Drag car, Track Car, Drift Car or Stock Cars. The MSD team designs, develops, tests and manufactures the entire line of MSD products including Ignition Controls, Coils, Timing Accessories and Spark Plug Wires and Accessories.

To place your order for a MSD Ignition product please use the order form at the bottom of the page

MSD Twin Coil
The Twin Coil unit from MSD has been used on GM vehicles from the mid 1980l to late 1990s

  • Direct performance replacement for GM 2 Tower coils.
  • 80:1 turns ratio and lower primary resistance produce high voltage output.
  • Works with stock ignition as well as MSD Ignitions.
  • CARB E.O. Approved.


MSD HVC Coil
The HVC Coil is designed exclusively for the HVC Professional Racing Ignition Control. The E-Core design of the HVC Coil is more efficient in producing more output with less loss.

MSD 6AL ignition box
MSD’s most popular ignition control box. A necessity for performance engines. The powerful capacitive discharge, multiple sparks ensure complete combustion of the air/fuel mixture to increase power and performance. MSD has taken the proven performance of the 6A and added a rev limiter. The soft touch rev control will protect your engine from overrevving. Adjustments are easily made with plug-in modules, so there are no dials, switches, or programs to deal with. At your selected rpm, the soft touch begins dropping the spark to some of the cylinders, and on the next cycle, these same cylinders are fired to prevent loading up with fuel. The MSD 6AL will work with virtually any 4, 6, or 8-cylinder vehicle with a distributor.

MSD DIS4
Improve the output of your late model distributor-less ignition system (DIS) with MSD’s DIS-4 Plus digital ignitions. The capacitive discharge ignitions feature multi-channel capability, complemented with multiple sparks, two rev limiters, and a timing control. These DIS ignitions are engineered with the latest in digital science, including power MOSFET technology and efficient IGBT coil drivers. They’re managed by a 15 MHz micro-controller for extremely fast compensations and decisions. In the end, this creates incredibly accurate spark delivery, rev limiting, and timing functions. Throttle response and mid-range pull are also improved, due to a series of powerful multiple sparks that last for 20 degrees of crankshaft rotation. There is a two-step rev limiter, which gives you one limit to set for holeshots and another for top-end performance. For engines using nitrous or extremely high cylinder pressures, you can also program a high-speed retard after the engine hits total timing. Both of these features are easy to adjust with the new built-in rotary dials. They also feature an ignition interrupt that will prevent the engine from starting by disabling the output to the coil, a retard feature that retards the timing at the top-end to prevent detonation, and an LED monitor that will alert you of a low supply of voltage or faulty input signals.

- Two adjustable Rev Limits
– Diagnostic LED
– Adjustable retard stage
– Ignition Interrupt Circuit

To place your order for a MSD Ignition product please use the order form below


Leave your response!

Add your comment below, or trackback from your own site. You can also subscribe to these comments via RSS.

Be nice. Keep it clean. Stay on topic. No spam.

This is a Gravatar-enabled weblog. To get your own globally-recognized-avatar, please register at Gravatar.